
TECHNICAL DATA.
-
Weight
Weight Unladen weight EU in kg1,925Max. permissible weight in kg2,350Permitted load in kg500Permitted axle load front/rear in kg1,180/1,220
-
Engine
Engine Cylinders/valves8/4Capacity in ccm4,395Stroke/bore in mm88.3/89.0Max. output in kW (hp) at 1/min412 (560)/6,000-7,000Max. torque in Nm at 1/min680/1,500-5,750Compression ratio : 110,0
-
Performance
Performance Top speed in km/h250Acceleration 0–100 km/h in s4,2
-
Fuel consumption
Fuel consumption Urban in l/100 km13,9Extra-urban in l/100 km7,6Combined in l/100 km9,9CO2 emissions in g/km231Tank capacity, approx. in l80
-
Wheels
Wheels Tyre dimensions front265/40 ZR19 102Y XLTyre dimensions rear295/35 ZR19 104Y XLWheel dimensions and material front9.5 J x 19 inches, light-alloyWheel dimensions and material rear10.5 J x 19 inches, light-alloy
Weight | |
---|---|
Unladen weight EU in kg
|
1,925
|
Max. permissible weight in kg
|
2,350
|
Permitted load in kg
|
500
|
Permitted axle load front/rear in kg
|
1,180/1,220
|
Engine | |
---|---|
Cylinders/valves
|
8/4
|
Capacity in ccm
|
4,395
|
Stroke/bore in mm
|
88.3/89.0
|
Max. output in kW (hp) at 1/min
|
412 (560)/6,000-7,000
|
Max. torque in Nm at 1/min
|
680/1,500-5,750
|
Compression ratio : 1
|
10,0
|
Performance | |
---|---|
Top speed in km/h
|
250
|
Acceleration 0–100 km/h in s
|
4,2
|
Fuel consumption | |
---|---|
Urban in l/100 km
|
13,9
|
Extra-urban in l/100 km
|
7,6
|
Combined in l/100 km
|
9,9
|
CO2 emissions in g/km
|
231
|
Tank capacity, approx. in l
|
80
|
Wheels | |
---|---|
Tyre dimensions front
|
265/40 ZR19 102Y XL
|
Tyre dimensions rear
|
295/35 ZR19 104Y XL
|
Wheel dimensions and material front
|
9.5 J x 19 inches, light-alloy
|
Wheel dimensions and material rear
|
10.5 J x 19 inches, light-alloy
|
Information about the data.
-
Further information on the official fuel consumption and on the official specific CO2 emissions of new automobiles can be found in the guidelines on fuel consumption and CO2 emissions of new automobiles which are available free of charge at all retail outlets and from DAT Deutsche Automobil Treuhand GmbH, Hellmuth-Hirth-Str. 1, 73760 Ostfildern, Germany.
Maximum speed optionally with high-speed setup.
All engines meet the EU6 emissions standard. Fuel consumption is determined in accordance with the ECE driving cycle (93/116/EC) made up of approximately one third urban traffic and two thirds extra-urban driving (based on the distance covered). CO2 emissions are measured in addition to fuel consumption as such. Fuel consumption levels are calculated on the basis of vehicles with standard equipment. Special equipment (e.g. wider tyres) can have a significant impact on fuel consumption and driving performance levels.
The technical data specified apply to vehicles in the German market. The models illustrated may, in part, include optional equipment and accessories not fitted as standard. According to the specific requirements of other markets, alterations may occur regarding models, standard and optional equipment as described in the text and illustrations. For precise information, please contact your BMW Partner. Subject to change in design and equipment. Subject to error. Equipment specific to national markets is not represented here.
Unladen weight (EU) in kg: the figure quoted includes a 90 per cent tank filling, 68 kg for the driver and 7 kg for luggage. Unladen weight applies to vehicles with standard equipment. Optional equipment may increase this figure.
Rated output: BMW recommends the use of super unleaded 95 RON fuel. Unleaded RON 91 fuel or higher with a maximum ethanol limit of 10 per cent (E10) is also permitted. The performance and fuel consumption rates listed are based on the use of RON 98 fuel.
-
M Carbon Ceramic Brake: Dependent on conditions and usage, features specific to the materials used can lead to operational noises particularly in wet conditions just before the vehicle comes to a halt. The impact of moisture and road salt can cause the breaking action to be equivalent to a conventional brake system. This can for a short time be experienced as a reduction in breaking action and can be balanced out by greater pressure on the pedal where necessary.